IN THE FOREGROUND

INITIAL APPEARANCE
WHY IS IT WET?

The long drying process is crucial for the characteristics of the product and to set the colour ...

MATERIAL CALCULATION

The stones and various models are distinguished as follows on the basis of the installation procedure: 1. Stones and bricks installed with joints (GeoBi finish), 2. Stones installed without joints (dry-stack installation) …

GEOCOLL & GEOBI WHY USE THEM?

Geocoll® contains natural hydraulic lime, giving the product features such as improved flow characteristics, zero vertical slump, breathability and good mechanical properties …

The characteristics of GeoBI are similar to manufactured stone veneer to make walls uniform, and remove thermal bridges and cracks.

MECHANICAL COUPLING

In the presence of critical installation bases with insufficient mechanical strength to support the wall covering …

Murogeopietra®
CAN BE FITTED TO ANY BASE

murogeopietra® must always be applied to solid structures constructed in line with professional building practices...

Murogeopietra®
is not a waterproof wall covering

murogeopietra® has been designed for minimum absorbency and maximum breathability features, however the installation base must be prepared correctly to prevent water seeping into walls.

THE IMPORTANCE OF A DOUBLE LAYER

Simply laying the item on the wall, which is typical with ceramics, will not ensure correct grip …

INSTALLATION TECHNIQUE

Depending on the case, THE STONE MODELS can be laid in 4 different versions …

GROUTING AND FINISHES

On a manufactured stone veneer wall the joint grouting plays a fundamental role in determining its characteristics …

INSTALLATION ON EXTERNAL THERMAL INSULATION

Geopietra® believes in sustainable architecture on external cladding, and has developed an integrated, guaranteed system

GEOCOVER COPING

Frost-proof coping with a new installation system that resolves the problem of water penetrating joints.

INSTALLATION on thermal insulation

Guaranteed procedure for installing murogeopietra® on EPS cladding, rock wool, cork and calcium silicate.

LIGHTING PROJECT OTTAGONO, STIKER AND CAPRI

A simple and innovative system for an installation without cracks and thermal bridge.

TERRAKOTTA: BRICK SLIPS natural and manufactured version

Characteristics of the installation and finish on brick-effect wall covering in the manufactured version and in natural terracotta of limited thickness.

BROWSE THE ONLINE TECHNICAL MANUAL